| Application |
| Function principle | absolute |
| Revolution type | multiturn |
| Electrical data |
| Operating voltage [V] | 9…30 DC; (“supply class 2” to cULus) |
| Current consumption [mA] | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) |
| Protection class | III |
| Reverse polarity protection | yes |
| Outputs |
| Short-circuit protection | yes |
| Code | binary |
| Measuring/setting range |
| Resolution | 4096 steps; 4096 revolutions; 24 bit |
| Accuracy / deviations |
| Accuracy [°] | 0.08 |
| Software / programming |
| Parameter setting options | CAN parameter; scaling; preset; Baud rate; direction of rotation; Node ID |
| Interfaces |
| Communication interface | CAN |
| Factory settings | | Baud rate: 125 k | | Node ID: 32 | |
| CAN |
| Protocol | CANopen; DSP – 406 V3.1; DS 301 V4.02; DS 306 V2.0 |
| Factory settings | | Baud rate: 125 k | | Node ID: 32 | |
| Operating conditions |
| Ambient temperature [°C] | -40…85 |
| Protection | IP 68; IP 69K |
| Tests / approvals |
| Shock resistance | |
| Vibration resistance | |
| MTTF [years] | 240 |
| Mechanical data |
| Weight [g] | 234 |
| Dimensions [mm] | Ø 36.5 / L = 100 |
| Materials | flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating |
| Max. revolution, mechanical [U/min] | 6000 |
| Max. starting torque [Nm] | 5 |
| Reference temperature torque [°C] | 20 |
| Shaft design | solid shaft |
| Shaft diameter [mm] | 10 |
| Shaft material | |
| Max. shaft load axial (at the shaft end) [N] | 180 |
| Max. shaft load radial (at the shaft end) [N] | 180 |
| Fixing flange | synchro-flange |
| Displays / operating elements |
| Display | | Preoperational mode | LED, green | | Operational mode | LED, green flashing | | error message | LED, red flashing | |
English
Malaysia
评价
目前还没有评价