| Application |
| Application | for mobile applications |
| Media | liquids and gases |
| Conditionally suitable for | use in gases at pressures > 25 bar only on request |
| Medium temperature [°C] | -25…90 |
| Pressure rating | |
| Min. bursting pressure | |
| Type of pressure | relative pressure |
| Electrical data |
| Operating voltage [V] | 9.6…36 DC; (communication mode: 18…32) |
| Current consumption [mA] | < 45 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 0.3 |
| Inputs / outputs |
| Number of inputs and outputs | Number of digital outputs: 2 |
| Outputs |
| Total number of outputs | 2 |
| Output signal | switching signal; IO-Link; (configurable) |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching frequency DC [Hz] | 170 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Measuring/setting range |
| Measuring range | | 0…100 bar | 0…1450 psi | 0…10 MPa | |
| Set point SP | | 1…100 bar | 20…1450 psi | 0.1…10 MPa | |
| Reset point rP | | 0.5…99.5 bar | 10…1440 psi | 0.05…9.95 MPa | |
| In steps of | |
| Factory setting | | SP1 = 25.0 bar | rP1 = 23.0 bar | | SP2 = 75.0 bar | rP2 = 73.0 bar | | OUT1 = Hno | OUT2 = Hno | |
| Accuracy / deviations |
| Switch point accuracy [% of the span] | < ± 0,5 |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K) |
| Characteristics deviation [% of the span] | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis deviation [% of the span] | < ± 0,1 |
| Long-term stability [% of the span] | < ± 0,1; (per year) |
| Temperature coefficient zero point [% of the span / 10 K] | 0,2; (0…80 °C) |
| Temperature coefficient span [% of the span / 10 K] | 0,2; (0…80 °C) |
| Response times |
| Response time [ms] | < 3 |
| Damping for the switching output dAP in steps [s] | 0,003 – 0,006 – 0,010 – 0,017 – 0,060 – 0,125 – 0,250 – 0,500 |
| Interfaces |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.0 |
| IO-Link device ID | 4 d / 00 00 04 h |
| Profiles | no profile |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 1 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 2.3 |
| Operating conditions |
| Ambient temperature [°C] | -25…85 |
| Storage temperature [°C] | -40…100 |
| Protection | IP 68; (7 days / 1 m water depth / 0.1 bar) |
| Tests / approvals |
| EMC | | noise immunity | EN 61000-6-2 | | EN 61000-4-2 ESD | 4 kV contact discharge / 15 kV air discharge | | EN 61000-4-3 HF radiated | 20 V/m | | EN 61000-4-4 Burst | 4 kV coupling clamp | | EN 61000-4-5 Surge | 0,5 kV supply / 1 kV signal for DC units | | EN 61000-4-6 HF conducted | 10 V | | noise immunity | according to the automotive directive 1995/54/EC / 04/104EG / 05/83/EG | | absorber chamber test to ISO 11452-2: | 80 V/m | | EN 50155 | Klasse T3, C1, S1 | |
| Shock resistance | | DIN IEC 60068-2-27 / DIN IEC 60068-2-29 | 1000 g | | DIN EN 61373 | category 3 | |
| Vibration resistance | | DIN IEC 68-2-6 | 20 g (10…2000 Hz) | | DIN EN 60068-2-64 | 14 g | | DIN EN 61373 | category 2 | |
| MTTF [years] | 310 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Mechanical data |
| Weight [g] | 226 |
| Materials | stainless steel (1.4301 / 304); FKM; EPDM/X; PA |
| Materials (wetted parts) | stainless steel (1.4305 / 303); ceramics; FKM |
| Min. pressure cycles | 100 million |
| Process connection | threaded connection G 1/4 external thread internal threadM5 |
| Restrictor element integrated | no (can be retrofitted) |
| Displays / operating elements |
| Display | | operation | 2 x LED, green | | switching status | 2 x LED, yellow | |
| Teach function | yes |
| Remarks |
| Remarks | | with reference to UL: “limited voltage” with overcurrent protection in accordance with UL508 | |
| Pack quantity | 1 pcs. |
| Electrical connection |
| Connection | Connector: 1 x M12 |
English
Malaysia
评价
目前还没有评价