| Application |
| Measuring element | ceramic-capacitive pressure measuring cell |
| Application | hygienic systems |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C] | -25…125; (150 max. 1h) |
| Pressure rating | |
| Min. bursting pressure | |
| Vacuum resistance [mbar] | -1000 |
| Type of pressure | relative pressure |
| No dead space | yes |
| MAWP (for applications according to CRN) [bar] | 50 |
| Electrical data |
| Operating voltage [V] | 18…30 DC |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| 2-wire |
| Current consumption [mA] | 3.5…21.5 |
| Power-on delay time [s] | 1 |
| 3-wire |
| Current consumption [mA] | < 45 |
| Power-on delay time [s] | 0.5 |
| Inputs / outputs |
| Number of inputs and outputs | Number of analogue outputs: 1 |
| Outputs |
| Total number of outputs | 1 |
| Output signal | analogue signal |
| Number of analogue outputs | 1 |
| Analogue current output [mA] | 4…20; (scalable) |
| Max. load [Ω] | 700; (Ub = 24 V; (Ub – 9 V) / 21.5 mA) |
| Short-circuit proof | yes |
| Overload protection | yes |
| Measuring/setting range |
| Measuring range | | -1…10 bar | -14.5…145 psi | -0.1…1 MPa | |
| Analogue start point | | -1…8 bar | -14.5…116 psi | -0.1…0.8 MPa | |
| Analogue end point | | 1…10 bar | 14.5…145 psi | 0.1…1 MPa | |
| In steps of | | 0.005 bar | 0.1 psi | 0.0005 MPa | |
| Factory setting | | ASP = 0.0 bar | AEP = 10.0 bar | | |
| Accuracy / deviations |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,2 (nach DIN EN 61298-2); (incl. drift when overtightened, zero point and span error, non-linearity, hysteresis; Turn down 1:1) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,05; (0…70 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,15; (0…70 °C) |
| Response times |
| Damping for the analogue output dAA [s] | 0…4 |
| 2-wire |
| Step response time analogue output [ms] | 30 |
| 3-wire |
| Step response time analogue output [ms] | 7 |
| Interfaces |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| IO-Link device ID | 662 d / 00 02 96 h |
| Profiles | Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000) |
| SIO mode | no |
| Required master port type | A |
| Process data analogue | 3 |
| Min. process cycle time [ms] | 3.2 |
| Operating conditions |
| Ambient temperature [°C] | -25…80 |
| Storage temperature [°C] | -40…100 |
| Protection | IP 67; IP 68; IP 69K |
| Tests / approvals |
| EMC | | DIN EN 61000-6-2 | | | DIN EN 61000-6-3 | | |
| Shock resistance | | DIN EN 60068-2-27 | 50 g (11 ms) | |
| Vibration resistance | | DIN EN 60068-2-6 | 20 g (10…2000 Hz) | |
| MTTF [years] | 323 |
| UL approval | |
| Mechanical data |
| Weight [g] | 302 |
| Materials | stainless steel (1.4404 / 316L); PBT |
| Materials (wetted parts) | ceramics (99.9 % Al2O3); PTFE; stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4 |
| Min. pressure cycles | 100 million |
| Tightening torque [Nm] | 20; (recommended tightening torque depends on lubrication, seal and pressure rating) |
| Process connection | threaded connection G 1 external thread sealing cone |
| Displays / operating elements |
| Display unit | bar; psi; MPa |
| Remarks |
| Pack quantity | 1 pcs. |
| Electrical connection |
| Connection | Connector: 1 x M12; Contacts: gold-plated |
中文
Malaysia
Reviews
There are no reviews yet.