Application |
Application [m] | 0.03…0.3 |
Electrical data |
Operating voltage [V] | 10…30 DC; (“supply class 2” to cULus) |
Current consumption [mA] | < 75 |
Current consumption reference voltage [V] | 24 |
Protection class | III |
Reverse polarity protection | yes |
Type of light | red light |
Wave length [nm] | 650 |
Typ. lifetime [h] | 50000 |
Outputs |
Electrical design | PNP |
Output function | 2 x normally open / normally closed; (parameterisable) |
Permanent current rating of switching output DC [mA] | 100; (per output) |
Type of short-circuit protection | pulsed |
Overload protection | yes |
Detection zone |
Max. light spot width [mm] | 3 |
Max. light spot height [mm] | 3 |
Light spot dimensions refer to | at maximum range |
Background suppression [m] | 0.03…19.2 |
Measuring/setting range |
Measuring range [m] | 0.025…0.3 |
Sampling rate [Hz] | 33 |
Interfaces |
Communication interface | IO-Link |
Transmission type | COM2 (38,4 kBaud) |
IO-Link revision | 1.1 |
SDCI standard | IEC 61131-9 |
IO-Link device ID | 00 03 F4 / 1012 |
Profiles | Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis |
SIO mode | yes |
Required master port type | A |
Process data analogue | 2 |
Process data binary | 2 |
Min. process cycle time [ms] | 6 |
Operating conditions |
Ambient temperature [°C] | -25…50 |
Note on ambient temperature | In ambient temperatures < -10 °C a warm-up time is necessary. | Laser is off. | |
Storage temperature [°C] | -30…80 |
Protection | IP 65; IP 67 |
Tests / approvals |
EMC | |
Laser protection class | 1 |
Notes on laser protection | Caution: | laser light | laser class: | 1 | | EN / IEC60825-1:2007 | | EN / IEC60825-1:2014 | | Complies with 21 CFR 1040 except for deviations pursuant to Laser Notice No. 50, dated June 2007. | |
MTTF [years] | 181 |
Mechanical data |
Weight [g] | 205 |
Dimensions [mm] | 61.7 x 22.5 x 45.2 |
Materials | Housing: stainless steel (1.4404 / 316L); PPSU; ABS; PMMA; PBT PC; EPDM; front lens: glass |
Displays / operating elements |
Display | switching status | 2 x LED, yellow | | 1 x alphanumeric display, 3-digit | |
Accessories |
Accessories (supplied) | |
Remarks |
Remarks | operating voltage “supply class 2” according to cULus | |
Pack quantity | 1 pcs. |
Electrical connection |
Connection | Connector: 1 x M12 |
Diagrams and graphs |
hysteresis graph | x: | distance sensor/object [mm] | y: | min. distance object/background [mm] | 1 = | background (black 6 % remission) | 2 = | background (white 90 % remission) | |
| a: | sensor | b: | object | c: | background | x: | distance sensor/object [mm] | y: | min. distance object/background [mm] | |
Other data |
Parameter | Setting range | Factory setting | Uni | mm, inch | mm | OU1 | Hno, Hnc, Fno, Fnc, OFF | Hno | SP1 [mm] | 30…300 | 300 | nP1 [mm] | 30…300 | 90 | FP1 [mm] | 30…300 | 110 | OU2 | Hno, Hnc, Fno, Fnc, OFF | Hno | SP2 [mm] | 30…300 | 30 | nP2 [mm] | 30…300 | 190 | FP2 [mm] | 30…300 | 210 | dS1 [s] | 0…0.1…5 | 0 | dr1 [s] | 0…0.1…5 | 0 | dS2 [s] | 0…0.1…5 | 0 | dr2 [s] | 0…0.1…5 | 0 | dFo [s] | 0…0.1…5 | 0.1 | dIS | ON / OFF | ON | |
Repeatability: 6 σ |
| repeatability of the measured values | | distance | white (90 % remission) | black (6 %…90 % remission) | 25…300 mm | 2.0 mm | 5.0 mm | |
The values apply at | | Extraneous light on the object | < 10 klx | constant ambient conditions | 23 °C / 960 hPa | minimum power-on time in minutes | 10 | |
Reviews
There are no reviews yet.